Labware

Red Natural rubber tubing made to BS 2775. Bore: 8mm Wall size: 2mm Length: 1M **This is suitable for burners with inlet tube of o.d. 9-10mm.**

Pack of 10 stoppers made of superior quality rubber.Orange in color, with one hole.The durable, rubber construction is suitable for use with chemicals.Resistant to acids,

Pack of 10 stoppers made of superior quality rubber.Orange in color, solid.The durable, rubber construction is suitable for use with chemicals.Resistant to acids,

These spatulas have one end which is flat and the other end is spoon form.  Made from Stainless steel. Length: 200mm

Polypropylene, riffled end for rubber tubing. May be autoclaved. To fit tubing nominal bore. Full length: 72mm Side length: 55mm O.D.: 7-8mm

Safety matches supplied in 10 boxes of 40 matches.Ignited by frictional heat generated by striking the match against a suitable surface. Product may vary from image

Natural red rubber To BS 2775. Bore: 10mm Wall size: 2mm length: 1M

Natural red rubber tubing made to BS 2775. Bore: 12.5mm Wall Size: 2.25mm Length: 1M

RS One Hole Bottom Dia 21mm P10

Pack of 10 stoppers made of superior quality rubber.Orange in color, solid.The durable, rubber construction is suitable for use with chemicals.Resistant to acids,

-10<strong> C</strong> to +110<strong> C</strong> 155mm Total Immersion Spirit Filled Laboratory Thermometer.Normal fillings are coloured red on a white back glass. Thermometers

Plated mild steel, to fit retort bases. Screwed 10 x 1.5mm metric thread. 500mm x 10mm

-10 C to +110 C 305mm Partial Immersion Spirit Filled Laboratory ThermometerThese spirit filled thermometers use specially selected filling materials which are coloured

-10<strong> C</strong> to +150<strong> C</strong> 305mm Partial Immersion Spirit Filled Laboratory ThermometerThese spirit filled thermometers use specially

A wire holder made from nickel plated brass with screw chuck which accepts wire or needles up to 0.56mm dia.24 SWG wire gauge.It can be used to hold a loop for liquid flame tests,

Heavy Duty Powder Coated Bosshead for rods up to 16mm. Thicker than normal 7mm threaded clamping screws Adjustable screw Holds rods orthogonally (90 degrees) to

RS Two Hole Bottom Dia 21mm P10

With welded joints, plain stem Stainless steel Retort Closed Ring 16.5cm stem 6mm diameter rod Inside Diameter of ring 5cm Total Length is 23cm

A Hoffman clip is used to seal flexible tubing.Nickel-plated bronze clamp with projecting plate to prevent damage to the tubing by the screw. Hinged side bar for fitting and

-10<strong> C</strong> to +110<strong> C</strong> 305mm Partial Immersion Spirit Filled Laboratory Thermometer< strong>Specification:</strong> <strong>Range C:</strong> -10

Glass alcohol lamp: spirit burner and plastic cap, with wick and wick holder.Glass is sodalime Capacity: 100cm Height: 105mm Use it to compare the efficiency of

-10 C to +50 C 305mm length Partial Immersion Spirit Filled Laboratory ThermometerThese spirit filled thermometers use specially selected filling materials

-10<strong> C</strong> to +110<strong> C</strong> 155mm Total Immersion Spirit Filled Laboratory ThermometerThese spirit filled thermometers use specially selected filling

-20 C to +110 C 305mm Partial Immersion LO-Tox Laboratory Thermometer <strong>Range:</strong> C -20 to +110<strong></strong> <strong>Divisions:</strong>