Labware

-10<strong> C</strong> to +260<strong> C</strong> 405mm Partial Immersion LO-Tox Laboratory Thermometer <strong>Range C:</strong> -10 to +260<strong></strong>

-20 C to +110 C 305mm Partial Immersion LO-Tox Laboratory Thermometer <strong>Range:</strong> C -20 to +110<strong></strong> <strong>Divisions:</strong>

Safety matches supplied in 10 boxes of 40 matches.Ignited by frictional heat generated by striking the match against a suitable surface. Product may vary from image

Glass alcohol lamp: spirit burner and plastic cap, with wick and wick holder.Glass is sodalime Capacity: 100cm Height: 105mm Use it to compare the efficiency of

Natural gas tube. Die cast base. Epoxy coated. Smaller in height than the average Bunsen burner for more intricate work .<strong>Dimensions:</strong> Burner Tube Dimensions:

With welded joints, plain stem Stainless steel Retort Closed Ring 16.5cm stem 6mm diameter rod Inside Diameter of ring 5cm Total Length is 23cm

Plated mild steel, to fit retort bases. Screwed 10 x 1.5mm metric thread. 1000mm x 12.5mm

Plated mild steel, to fit retort bases. Screwed 10 x 1.5mm metric thread. 500mm x 10mm

Plated mild steel, to fit retort stand bases Screwed 10mm x 1.5mm metric thread Rod Dimensions: (L)600mm x (D)12.5mm

Plated mild steel, to fit retort bases. Screwed 10 x 1.5mm metric thread. 750mm x 12.5mm

This is a mini infrared thermometer from Uni-Trend that determines the temperature of objects through their emitted radiation. Its main function is to measure

For use with butane/propane gas burners. Neoprene tubing has increased life expectancy compared to natural rubber. Bore: 8mm Wall: 2mm Length: 1M

For laboratory burners. Internal Diameter: 5mm External Diameter: 8mm Length: 450mm

For laboratory burners. Internal Diameter: 5mm External Diameter: 8mm Length: 600mm

This bundle contains 5 Stands and 1 pack of Night Lights. Ideal for experiments where candle heat is adequate. Pack of 100 tea lights with just over 12 hour burn time 5

Stainless steel Night Light stand. Ideal for experiments where candle heat is adequate. Dimensions: Width, Height and Depth is 5cm . Hole diameter is 4cm

A pack of 10 triangles made from pipeclay stems and mounted on stout iron wire Side Length: 65mm

A quick and easy infrared thermometer providing safe temperature measurement where non-contact access is required.Supplied complete with wrist strap, clip out

Pocket Test Thermometers, Spirit - BlueReversible plastic case thermometer - the clear body fits to the cap with a bayonet clip which allows the case to be reversed

Nickel plated burner tube with rotatable air regulator and cylindrical connector. Mounted on pressure die casted base.Similar to standard models but with a smaller

Transparent, Non-toxic PVC Tubing PVC - Resistant to acids, alkalis and continuous heat up to 60&deg;C.May be autoclaved up to 125&deg;C, returning to its original

Transparent, Non-toxic PVC Tubing PVC - Resistant to acids, alkalis and continuous heat up to 60&deg;C.May be autoclaved up to 125&deg;C, returning to its original

Raised centre section, one end flat and bent up and other end formed into a scoop. Made from Stainless steel. Length: 140mm.

Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of 1 short side. Finished in black and fitted with rubber feet. Size : 160mm x 100mm Retort Stand Rod is