Badges
Rigid Plastic ID Card Holder Purple
Code:BADGE14
Overview
Reusable tough plastic card holder. Can be used landscape or horizontal. Takes a 85x55 card. Can be used with lanyard or clip
A rigid ID badge holder designed to hold 1 single 86mm x 54mm card which is the standard CR80 760 Micron cards used in most organizations for access control and identification. The holder has two small round punch holes and a large middle holder to allow any lanyard or badge clip to attach. The holder is open-faced which means the front of the card is not covered but the card will remain held inside.
A great way to match your corporate branding and make a good impression. Built to last and also made with ridges to product ID card with a mag stripe
There is a massive range of colours so if you have a particular colour requirement, please ask.
-
Information
A rigid ID badge holder designed to hold 1 single 86mm x 54mm card which is the standard CR80 760 Micron cards used in most organizations for access control and identification. The holder has two small round punch holes and a large middle holder to allow any lanyard or badge clip to attach. The holder is open-faced which means the front of the card is not covered but the card will remain held inside.
A great way to match your corporate branding and make a good impression. Built to last and also made with ridges to product ID card with a mag stripeThere is a massive range of colours so if you have a particular colour requirement, please ask.
Product Enquiry
Please provide your contact information below and we will get back to you as soon as possible.